Freon leak finding and condenser coil Repair
The customer had a problem - freon came out from the HVAC system. Technician put to condenser coil some nitrogen and found issue.
The customer had a problem - freon came out from the HVAC system. Technician put to condenser coil some nitrogen and found issue.
The diagnostics showed that the control board of the DESA Printed Circuit Board 230954 and the fan limit switch were worn out. The replacement ...
The oven seemed to work - the dryer turned on, the light worked but there was no heating.The diagnosis revealed that the control board was ...
Wall Heater Williams installation in , . The client had a PG & E order to replace the wall heater with a new one. Well, ...
The client’s heater stopped working. It could whether be switched for 3-4 seconds and turned off or could not turn on at all. The ...
The client’s ceiling heater did not start, which was a heat pump. The issue turned out to be in the wall thermostat - closing ...
The client’s heater stopped heating. It turned out to be necessary to replace the pump and motor entirely, because water penetrated in the stator and ...
The client’s ice machine stopped making ice. The technician found out that when cleaning the condenser coil was totally bent. The technician arched the coil ...
The client complained that his heater did not heat up quickly enough. The diagnosis revealed that the system lacks pressure. What meant that it was ...
Thank you for your interest in Fuse Service
Phone: (408) 898-1576
Our address:
3314 Victor Ct, Santa Clara, CA 95054
E-mail: support@fuseservice.com
Business Hours: 8am - 8pm every day. Customer support 24/7