HVAC - AC System installation/replacement: Including: • Old system unmount haul away and recycling • New evaporator coil installation according to the building standards • ...
Problem: freon leak, bad compressor,bad evaporator. Services: nitrogen test leak finding brazing works HVAC - vacuuming seal system : removing from seal system air, moisture and ...
Our qualified technicians performed a commercial refrigerator repair in San Jose, California. Spoilers! No more spoiled milk when your fridge works properly. If you need ...
“Day And Night” Furnace Diagnostic: need to be replace control board and gas valve. Materials: Control Board and Gas Valve.
We accomplished: 1) Furnace Carrier 80 000 BTU replacement to Carrier 100 000 BTU 2 stage, ECM motor 2) Condenser unit 4 ton R22 to ...
Gas valve of wall heater didn't light up main burner. Replacement of thermocouple didn't help. I replaced gas valve, shut off connector and gas line. ...
Tech tried to replace thermocouple but it didn't help. So we replaced gas valve which was provided by customer. Works now. Yeawow!
The customer's heat pump didn't work very well and has to be recharged with refrigerant every year. The leak was on the condenser coil. So ...
Customer's heater started leaking. After few minutes of investigation tech found issue with drip pan. There was big hole. So drip pan discontinued. We made ...
Customer wanted to build new walk-in cooler. We spent 5 days for build whole walk-in cooler from 0 to working condition walk-in cooler. https://www.youtube.com/watch?v=S6S0Mjredm4&t=16s https://www.youtube.com/watch?v=lKS-sgDJFao
Customer wanted to replace very-very old furnace with ducts. So... We did it. Check out that was before and that's after. #furnace #installation #hvactech https://www.youtube.com/watch?v=wXXimV93vpI
Customer complained air conditioner not cooling at all. We turned on thermostat on COOL and I saw outside condenser unit started running - also I ...
Deena D.2024-04-19Very nice, knowledgeable, and helpful technician. Provided the options and associated costs. Would use this company again.
Ron B.2024-04-17We chose Fuse to do the HVAC portion of our home remodel and we're very happy with their work! They installed a full Mitsubishi Mini-split heat pump system all throughout our house in 6 rooms. It was a massive job and they did the work relatively quickly and efficiently. The supervisor, Maxim, was very friendly and knowledgeable. Out of several bids that we got, theirs was the only one that gave us everything we wanted at a competitive cost. We'd be happy to recommend Fuse! We also had Fuse Electric work on the electrical portion of our home remodel, for which I wrote up a separate review.
Pablo L. D.2024-04-10Great service. They respond really fast and did a great job fixing my thermostat issues.
Manu B.2024-04-07We got our duct work completely replaced in our 50 yr old home. They recommended the work, other companies didn't do this much due diligence and mentioned about asbestos but FUSE technicians went step ahead and climbed into attic and our crawl space to ensure there were no asbestos to begin with. Honest people and very competitive if not best quote I got. Moreover the installer, David and Jeremy worked 2 long days non stop to get work done at our home with 100% satisfaction. David explained everything to me and provided other recommendations for future. He is the most honest technician I have encountered in so long. Because of David I wouldn't hesitate to work with FUSE again. Thank you for such a great work. Very happy and highly recommend FUSE!!
K R.2024-04-05The technical crews were excellent; very knowledgeable and capable. They were able to do our HVAC, water heater and ductwork replacement even when faced with several unexpected and very challenging situations. David in particular worked some very long hours to get everything installed correctly. The administration side had a few glitches, but everything worked out OK. I would recommend them, but if you are eligible for the Penninsula Clean Energy interest free loan, be sure to apply for it before the work is completed.
Matthew J.2024-04-05Exceptional service from FUSE HVAC! They installed a Mitsubishi HVAC system in our home, and we couldn't be happier. The team was professional, knowledgeable, and efficient throughout the process. Our home is now perfectly comfortable year-round, thanks to their expertise. From consultation to installation, everything was seamless and hassle-free. Highly recommend FUSE HVAC for anyone looking for top-notch HVAC solutions!
Amitabha C.2024-04-04Fuse HVAC installed Mitsubishi Heat pump in my house and completed the project on 31st March 2024. David and Jeremy started the project and David finished the installation. David worked Saturday and Sunday until 11 PM to complete the work. It took 4 1/2 days. I am very happy with the work that David performed. I was watching the process of installation of the pump and was very satisfied to see that after finishing each step David will spend 10-15 min inspecting the work that he did to make sure that there was no mistake. The result was that during pressure testing to check for gas leakage or when the heat pump was run there was no unanticipated issue. The new ductwork that was installed by FUSE passed the HERS test. FUSE is also installing the attic fan to keep the air circulation going and keep the attic cooler. FUSE was referred to by my friend who used them for installing a similar heat pump and although they were a little more expensive than a few quotes I got from other vendors, I decided to go with them based on my friend's recommendation. I had made a right choice! My only criticism for FUSE is they are not able to estimate the time that it will take to finish the project. They told me it will be done in 3 days but it took 4 1/2 days. My project needed the air handler to be moved to the attic but because the space which had the gas heater was too narrow for the air handler. On the whole it was a good experience working with FUSE. They kept us warm for two days with heater fans and David worked Easter Sunday until 11 PM to install and start up the system without hurrying up at any step to get the installation completed earlier. A big thanks to him and to his assistant Jeremy!
Thank you for your interest in Fuse Service
Phone: (408) 898-1576
Our address:
2222 Ronald St, Santa Clara, CA 95050
E-mail: support@fuseservice.com
Business Hours: 8am - 8pm every day. Customer support 24/7